Nail File Grit Explained: 80, 100, 180 or 240?
Nail file grit is simply a count of how many abrasive particles sit in a given area of the file — the lower the number, the coarser and faster-cutting the file. An 80 grit file is for shaping hard acrylic. A 240 grit file is for gently refining a natural nail. Reaching for the wrong one is how nails get thinned, scratched and sore.
This guide is for nail technicians building their kit, and for anyone filing their own nails at home who wants to stop damaging them.
How nail file grit numbers work
The number printed on a file tells you how fine the abrasive surface is. A low number means fewer, larger particles, so the file removes material quickly and leaves a rougher surface. A high number means more, smaller particles, so it removes less with each stroke and leaves a smoother finish.
The practical rule: the harder the material, the lower the grit you need. The softer or more delicate the surface, the higher the grit. Natural nails sit at the delicate end of that scale.
One caution before you buy: grit numbers are not standardised across the industry in the way sandpaper grades are. A 180 from one brand can feel noticeably coarser than a 180 from another. Always check the maker’s label and test a new file on a practice tip before you put it near a client.
Nail file grit chart

| Grit | Feel | Typical use |
|---|---|---|
| 80–100 | Very coarse | Shaping and reducing bulk on acrylic enhancements |
| 100–150 | Coarse | Shaping hard gel and acrylic, shortening enhancements |
| 150–180 | Medium | Refining enhancement shape, removing shine before product |
| 180–240 | Fine | Shaping the free edge of natural nails, smoothing gel and BIAB |
| 240+ | Very fine | Final smoothing, preparing the surface before polish |
| Buffers / shiners | Ultra fine | Bringing up shine on a natural nail |
Which grit for which job
Shaping a natural nail. Stay at 180 or higher. Anything coarser removes far more of the nail plate than you intend, and the damage is not visible until the nail starts splitting weeks later.
Removing shine before gel or BIAB. A 180 is enough. The goal is to take the gloss off, not to sand the nail. If you can see white dust coming off in quantity, you have gone too far — and over-thinned nails are one of the reasons a set lifts early, which we cover in our guide to why gel polish peels.
Shaping acrylic. This is where 80–100 earns its place. Acrylic is hard, and trying to shape it with a fine file wastes time and heats the enhancement through friction.
Refining gel and BIAB. Work at 150–180 for shape, then move up to 240 to smooth before the top coat.
Buffing. Use a buffer or shiner only, and only on a nail that does not need the thickness.
If you are using an electric file rather than a hand file, the same logic applies to bit grit — see our breakdown of which e-file bit does what.
Files, buffers and blocks are not the same tool
Files are flat or curved abrasives used mainly on the free edge to set shape and length.
Buffers are padded, usually finer, and used on the surface of the nail to smooth and shine.
Blocks are thick foam buffers, often with a different grit on each side. They are comfortable to hold but easy to over-use, because the foam flexes around the curve of the nail and sands more of it than you realise.
Hygiene: what the rules actually say
This is the part most home filers and plenty of new technicians get wrong. NSW Health’s fact sheet on nail treatments is explicit that files and buffers “need to be cleaned and disinfected after use on each client”, and that “it is recommended that single-use equipment is used”.
In practice, salons handle this one of two ways:
- Single use — the file goes in the bin after the appointment.
- One client, one file — the file is labelled with that client’s name and kept in a closed, clean container for their next visit only.
A porous foam file that has been used on someone else cannot be made safe by wiping it. If you are a client and you see a technician take a visibly used file out of a drawer, it is reasonable to ask about it.
NSW Health also notes that equipment which is difficult to clean and sterilise should be single-use, and that anything which penetrates the skin must be sterile before use — a different and stricter standard than files and buffers.
Three mistakes that damage nails
1. Using a coarse grit on natural nails. An 80 or 100 grit file belongs on acrylic. On a natural nail it removes layers of nail plate in a few strokes.
2. Sawing back and forth. On a weak or peeling nail, a back-and-forth motion separates the layers at the free edge. File in one direction instead.
3. Filing the nail surface to “help it grip”. Removing shine is not the same as removing thickness. Most lifting problems are caused by moisture, oil or product applied too close to the skin — not by a nail that was too shiny.
A simple starting kit
If you are building a kit from scratch, three files cover most work: one 100/180 for enhancements, one 180/240 for natural nails and refining, and a buffer. Add coarser grits only when you start working with acrylic regularly.
Source: NSW Health, Nail treatment fact sheet.
Practise with trainer feedback
ACBNT is a Registered Training Organisation (RTO 45331) teaching nail technology in Cabramatta, Sydney. Building 5, 82-84 John Street, Cabramatta NSW 2166 · 0431 932 227 · info@acbnt.edu.au